Hit the jump for a gastronomic update on a Strobist cheapskate classic.
__________
Of the 1,000+ posts on Strobist at this writing, one of the most popular is the $10 Macro Studio -- a cardboard box hack that makes it almost impossible to take a bad shot of a small object.
With a little alteration, that same concept can be used to create classic food photography lighting with a light source as simple as a desk lamp. Of course, a speedlight will work great, too...
Thinking Outside of the Box
The classic direction for lighting food is from the top/back. In typical presentation, food has more width and depth than it does height. So the top/back is a logical position from which light can rake across the food to reveal texture and form.
This hard light almost makes the 'maters look as if they are made of wood and painted glossy red. You can do a lot to manipulate the visual perception of surface quality with different lighting techniques.
You could easily soften that light with an umbrella if you have one. But if your food or setting is specular, those ribs (Mmm-hmm-hmm-hmm... ribs...) are gonna give you problems.
This is one of those instances where a soft box is much better than a shoot-through. But there is no need to shell out for one if you are not shooting this kind of stuff all of the time.
Instead, you can hack a large cardboard box (quite literally) and essentially turn the soft box inside out.
And if you use a razor knife like I did, please be careful. Or at least bookmark this page before you start. Just sayin'.
(LIGHTING GEEK NOTE: I had fun doing a quickie shot of the cut-up cardboard box. Click it to see bigger, with notes on the locations of the four flashes involved ...)
That big open square on the top is gonna get some diffusion material, so the window will do its job and improve your harsh light source. Tracing paper is ideal, but tissue paper (big, like from a gift) works great. Stretch it smooth. Wax paper will do in a pinch, too.
I scrounged a little Rosco Tuff Frost, which is tough (duh) and uniform, not to mention color-neutral. That last part is important, if you are using some type of mystery diffusor.
Also, if you are using this with a desk lamp, use an incandescent bulb (no CFLs) and set your camera's white balance to tungsten. Everything will work fine.
(Not that this is a foodie blog, but you regulars would be surprised at who passes through here while learning to shoot stuff for their site.)
That's an easy fix, and we do not need another light, either. We can get double-duty out of our nice main light by adding a reflector:
By default, it will not overpower the main light source, either. It's a reflector, and cannot give out more light than it is receiving.
Here it is close-up, which is the same photo at the top of the post. Maybe you like the extra detail, or maybe the second highlight turns you off. That's up to you -- add salt to taste.
Need more light? Try aluminum foil reflectors. That's what I used for this cake. Crinkle it up, then straighten it back out for a nice, smooth, pebbled reflector surface. You can choose the shiny or matte surface, too, for different looks.
Again, that SB-800 flash could easily be a desk or floor lamp. And the grey backdrop was just to hide the white wall reflection in the initial shot. Once you get the diffusor panel up, that problem solves itself.
__________
Fast Food
So, there you go -- an easy entré into food photography. If this kind of thing floats your boat, you might want to consider a medium-sized soft box, which will of course make this kind of light very easy. And it travels well, too.
If you're a food blogger and you decide to play with it, link in and spread the luv -- and post a comment so we can see what a hotshot food photographer you are now...
0 comments:
Post a Comment